Powder Resistivity Meter

33-162

New product

Powder resistivity is an important parameter at electrostatic powder coating operations.

For this reason it is highly recommended to verify the resistivity of powder paint and/or powder enamels regularly. 

Features & benefits

  • Accurate & repeatable resistivity measurements
  • Easy to operate & clean
  • Suitable for powder paint & powder enamel
  • Export test results to PC

More details

More info

Powder Resistivity Meter, model 33-162, is provided with a special improved test cell to enable accurate and reproducible measurements to be made of powder resistivity.

Resistivity measurements are displayed directly in ohm-metres with either a fixed low voltage of 10V or a variable high voltage of 4.5 - 10kV to suit particular sample properties.

The reading displayed is automatically compensated in relation to the voltage applied.

The latest design of the sample cell holder has a powder capacity of only 28 ml and is fully demountable for easy cleaning.

The Resistivity Meter also enables measurements to be made of voltages and quantities of charge by use of the optional high voltage probe and screened Faraday pail.

Technical Specifications

Main Input Voltage220-240v, 50 & 60Hz or 100 – 115v, 50 – 60Hz
Resistivity Ranges8 decade ranges covering 108to 1015Ohm metres.
Resistivity Test Cell Voltage(i) Variable from 4 to 10kV over the resistivity range 1011 to 1015 Ohm Metres
(ii) Fixed at 10v for resistivity range of 108to 1010 Ohm Metres.
Test CellIntegrated with 28 ml volume
Display480 X 272 resolution TFT touch screen On the resistivity ranges the instrument automatically allows for the variable voltage applied to the test cell and displays the resistivity value directly.
CommunicationsType B USB connector. The equipment is supplied with a USB CDC (Communication Device Class)for exporting measurement results to a PC or Laptop. Contact us for details of the available software for this instrument.

Data sheet

PurposeMeasuring powder resistivity and optionally charge to mass + charge to surface

Reviews

Write a review

Powder Resistivity Meter

Powder Resistivity Meter

Powder resistivity is an important parameter at electrostatic powder coating operations.

For this reason it is highly recommended to verify the resistivity of powder paint and/or powder enamels regularly. 

Features & benefits

  • Accurate & repeatable resistivity measurements
  • Easy to operate & clean
  • Suitable for powder paint & powder enamel
  • Export test results to PC

Accessories

    14 other products in the same category: